Skip to main content
Loading…
This section is included in your selections.

A. Permanent Monuments.

1. Permanent monuments in accordance with the city of Wasco standards shall be set by the subdivider’s engineer or land surveyor at the following locations:

a. At all angle points and at the beginning and ending of all curves on the exterior boundaries of the subdivision;

b. At all intersections of street centerlines;

c. At the beginning and ending of all curves on the street centerlines within the tract;

d. At all the intersections of street centerlines and the exterior boundary of the subdivision.

2. All such monuments shall be set as to ensure an unobstructed site between adjacent monuments.

3. All such monuments shall be set as required by the Subdivision Map Act. The city engineer or other designated city official may check such monuments by field survey and verify that the positions of such monuments are correct. At such time as structural street sections are completed, frames and covers in accordance with city of Wasco standards shall be constructed.

B. Lot Corners.

1. The subdivider’s engineer or land surveyor shall monument all lot corners including each angle point, the beginning of each curve and the end of each curve. Such monument shall not be less substantial and enduring than a half-inch iron pipe eighteen inches long with a noncorrosive registered engineer’s or licensed surveyor’s marker on the head thereof. (Ord. 617 §2 (Exh. A), 2011; Ord. 474, 2002).