17.24.010 Drilling Island zone.
A. Purpose. The purpose of the Drilling Island (D-I) zone is to designate single lots and other relatively small areas within the boundaries of final map subdivisions that contain productive or potentially productive petroleum resources to promote the development of such resources in a manner compatible with surrounding development.
B. Permitted Uses and Permit Requirements. Extraction of petroleum mineral resources and all other uses determined to be similar to this use pursuant to Section 17.52.030 are permitted in accordance with the standards and procedures set out in Chapter 17.45, Oil and Gas Production.
C. Uses Permitted With a Conditional Use Permit.
1. Drilling of new well or reworking of existing well that is not in compliance with Chapter 17.45.
2. Recreation, entertainment and tourist facilities.
a. Park or playground.
3. Miscellaneous uses.
a. Subdivision drainage sump; provided, that written consent be given by mineral rights holder.
D. Development Standards. The following general development standards, Table 2-8, apply to the D-I zone as well as all development standards and performance standards contained in Chapter 17.45, Oil and Gas Production.
|
Development Standard |
Requirement |
Additional Requirements |
|---|---|---|
|
Lot Standards |
||
|
Minimum lot area |
2.5 acres |
|
|
Minimum production site area |
1.0 acres |
See 17.45.040 |
|
Parking |
No minimum requirements |
|
|
Minimum Setbacks |
||
|
Well, storage tank or production facility |
500 ft. from off-site buildings including dwellings 1,000 ft. from schools, churches or places of assembly |
See 17.45.040 |
|
Well |
100 ft. from any public right-of-way |
|
|
Structure Height |
||
|
Exploration and drilling equipment |
No height limit |
|
|
Well pumping units |
35 ft. |
|
(Ord. 706 § 3 (Exh. A), 2019).